Fall Sourdough Recipes (2024)

FAQs

How quickly should a sourdough starter rise and fall? ›

When your starter is reliably rising to double or triple its size and falling in the jar anywhere between 4-8 hours after you feed it (dependent on your ambient conditions and the flour you feed with) it is ready to bake with. When the starter is at the peak of its rise, it is called ripe, fed, or mature.

The secret to sourdough is simple: water. The more water you add to your dough will affect how open the crumb (bigger holes and softer texture) will be once it's baked.

This rise is expected and is a good indicator of strong fermentation activity. However, depending on the type of flour you are using to feed your starter, it may not rise all that high and fall all that far—and that's okay.

If your starter is well past peak (a few hours) and visibly falling, you can give it a “refresh” feeding to reactivate it.

stir your starter in between feedings - try stirring it twice in between feedings and really give it a chance to get oxygen into the mix. This will help to activate your starter without too much effort.

The loaf is also inclined to over spring resulting in a crumb with big, random, holes or channels running through the loaf. If you over-ferment the dough you run the risk of the gluten structure degrading and the loaf turning into a puddle of goo before your eyes, never to be retrieved and destined for the bin.

The best flour blend for creating a new sourdough starter is 50% whole-meal flour (whole wheat or whole rye) and 50% bread flour or all-purpose flour. I recommend a 50/50 mix of whole wheat flour and bread flour.

The taste of sourdough can be influenced by factors including fermentation time, temperature and flour type, as well as the microbes present in the starter.

Can I leave my starter out overnight after feeding it? Yes, if you have just fed it. Since the night is rather long, feed it in a 1:4:4 ratio so that's not over fermented by the morning. If for example you use a 1:1:1 ratio, the starter would have peaked in the middle of the night, and collapse by the morning.

Why did my sourdough starter fall? ›

If your sourdough starter is left too long it gets hungry and exhausted. You will know because it will have doubled and then the air pockets start to collapse and the mix deflates. This can happen at any temperature, but it will be slower to occur in cool environments and much faster in warmer.

If you don't want to put the dough in the fridge for a cold ferment, you can leave it to proof on the counter for a little while. You do need to be careful not to let it over ferment. Ideally, you want the temperature to be on the cooler side (no more than 21C / 69.8F). Let the dough relax into the banneton.

CAUSES OF FAULTY STARTERS: CAUSE OF FAILURE

Electrical connections faulty. Solenoid switch (engaging relay) stiff or faulty. Electric motor damaged electrically. Single-pinion gear, starter pinion or freewheel damaged.

Do I have to discard my sourdough starter? It would be best if you discarded some portion of your starter each time you feed it unless you want to continue to let it grow. Eventually, you need to discard the used “food” (flour and water) that's been used to sustain your starter during the last fermentation period.

If your starter gets completely covered on top with bubbles but does not rise, it is healthy but may just be a wet mix. Try reducing the water in your next feeding and see if you have different results. Also, the type of flour you are using can impede the rise of your starter.

Sourdough starter goes flat when it's been left too long for that temperature and it runs out of food. The starter fills with air, was not used in time, runs out of energy, and deflates. Deflation destroys the airy structure of the sourdough starter.

Try reducing the water in your next feeding and see if you have different results. Also, the type of flour you are using can impede the rise of your starter. All-Purpose flour, for example, will not rise as robustly as a blend of bread flour and whole wheat flour.

Let your starter rise at room temperature, ideally 75+ F (the warmer it is, the faster it will rise), until bubbly, active and double in size (2-12 hrs). When your starter is at peak height, it's ready to use. Eventually it will fall back down, and become inactive again. Then, you'll need to repeat the feeding process.

Often, the starter will double in size in 12 hours or less. Sometimes it takes 24 hours. If you get good bubbling and the starter doesn't double, that's OK.