Samsung Microwave Oven error codes - what do they mean? | Samsung UK (2024)
Most information codes for microwaves usually require verification by a technician. However, there are some information codes that you can fix yourself before contacting the Samsung service centre. Please check the table below and try the suggestions.
How to reset an error code. Before diving into the meanings of specific error codes, try a simple reset. Unplug your microwave or switch off the circuit breaker for 60 seconds. If the error persists, it's time to seek further assistance.
One of the most common error codes that Samsung microwaves display is “SE.” The SE error code can usually be solved by either resetting your microwave, replacing the control panel, or replacing the control board.
SOLUTION: Press and hold Power Freeze and Power Cool on your display simultaneously for 8-10 seconds until the screen flashes and a chime sounds. Error codes, if present, will appear on the screen.
Unplug the Microwave or turn off the house circuit breaker that supplies power to the Microwave for 30 seconds. Plug the appliance back in or reset the circuit breaker and try reprogramming the Microwave.
Some error codes can be removed or resolved by resetting the power to the unit. Power the unit down by turning off the circuit breaker(s) or fuse(s) for one (1) minute.Power the unit up by turning on the circuit breaker(s) or fuses(s).
To clear the error code from your microwave: Unplug the unit from the wall outlet or trip the circuit breaker to cut power supply to the machine.Allow the machine to remain unplugged for 10-15 seconds.Restore power to the unit.
With normal usage for an average family and good maintenance, a microwave often lasts for 7 to 8 years. If the microwave is used less frequently by a single person or a couple and is well-maintained, the lifespan can increase to up to 10 years.
Indication of an issue with the electronic control in the microwave. Sometimes shutting off the circuit breaker or fuse that supplies power to the Microwave Oven for 30 seconds will clear the fault, error or function code. However, there are some cases when service may be required.
With this error, the microwave has a communication error. Push the 'Stop/Cancel' button and pull the plug of the microwave out of the socket. Let the appliance cool down and restart your program.
Indication of an issue with the electronic control in the microwave. Sometimes shutting off the circuit breaker or fuse that supplies power to the Microwave Oven for 30 seconds will clear the fault, error or function code. However, there are some cases when service may be required.
C10 means that a sensor has failed, but it can also be caused by static build-up in the board. Have you tried unplugging the microwave or shutting the breaker off to the microwave?
Introduction: My name is Errol Quitzon, I am a fair, cute, fancy, clean, attractive, sparkling, kind person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
